Boeing 737 main landing gear wheel half being cured in MIL's recently installed infrared curing oven. IR curing technology has reduced cure cycle time from 7 days at ambient temperatures to 45 minutes.
Precision 5-axis machining – prior to chem film, mask, anodize- Metal finishing, coatings, nondestructive testing, precision welding
- Metal Finishing Lab - 26,000 sq/ft - anodize, chem film, passivation, electropolish, cadmium, titanium Clean, chemical milling, black oxide, zinc & manganese phosphate, pre-penetrant etch, nital etch, precision masking, full service wet laboratory
- Pre-Anodize masking of aluminum over chromate conversion coating
- Serving the aerospace, medical, industrial and power generation industries since 1942
- Cross section of electron beam weld for macro etch examination and radiography
- Chromate conversion coating of Ram Air turbine component
- Critical aircraft cargo component made of precipitation hardened stainless steel - magnetic particle inspected, passivated, multiple masks, prime painted and dry film lube
- Demasking of complex aerospace electronic chassis receiving chromate conversion coating, multiple masking operations, prime and paint
- NDT - liquid penetrant inspection
- Knurled aircraft fitting of stainless steel - passivated and red paint
- Silk screen part marking as the final step of a complex weapons systems faceplate receiving chem film, multiple masks, prime, paint, clear coat and silkscreen
- Precision machined titanium forging for Bell Helicopter with multiple selective finishes of dry film lubricant, primer and Bell Bluecoat
- Part marking - paint filling of characters
- Prime and paint application on backing plate for aircraft brake system
- Glowing cathode on 1,500 amp, 50 volt, type I chromic anodize tank
- Liquid Penetrant Inspection (LPI)
- Metallurgical, Nondestructive, Environmental Testing, Coatings, Metal Finishing, Precision Welding
- Radiography inspection: X-Ray image
- Surface crack revealed after nondestructive testing (NDT)
- MIL is fully approved to the following quality standards: ISO9001, AS9100, Nadcap and Certified FAA Repair Station.
- MIL offers coatings such as powder coating, teflon, dry film lube, and Mil spec prime and paint
- Coated parts at MIL
Stay informed about news and events at MIL.